Opel Insignia 35 2.0 CDTI ecoFLEX A20DTHdiesel 2010 160cv

Opel - Insignia 35

2.0 CDTI ecoFLEX A20DTH
Fuel: diesel
Year: 2010

Selected model

Info model	KW	HP	NM
Serie:	118	160	-
*Eco (18%) :**	139.24	188.8	-
*Hard (24%) :**	146.32	198.4	-

* approximate percentage

Remapping:

	ECU remapping on bench / BDM - CAR 349.00 € ∨	Quantity
		View details

	_Tubo downpipe rimozione FAP DPF T5A_ 190.00 € ∨	Quantity
		View details

Motor Tuning:

	H-T BOX CR-3 ITS 230.00 € ∨	Quantity
		View details

http://house-tuning.de/HT%20Box%20CR/top.png

Hardware

CR3 iTs®

Software

	HT Box CR 3 iTs is equipped with latest-generation microprocessor. The signal processing method is extremely accurate, and processor has immediate response.		HT Box CR3 iTs has stored programs 20, 10 for the injection management and 10 for the turbo management. The programs can be varied by: Program selector> Remote Control> Power Manager (optional). The two channels are handled simultaneously.
	Program selector has two buttons needed to select the maps stored in the CR3 iTs processor. The left button (USB side) is used to reduce programs the right button to increase.		Programs from 0> 4 have as their objective fuel economy and increasing torque (NM).
	Digital display, after pressing one of the selector buttons programs, lights up and shows the program set.		Programs from 5>9 have as their objective the maximum power increase (HP-CV-PS).
	CR3 is equipped with a key to activate or deactivate the Tuning, directly on the main PBC.		CR3 has memored 10 tuning programs for injection channel. Buying a new car, your CR3 can update programs (extra service).
	Each CR 3 has the remote control. Via the keys A + B you can enable or disable the Tuning. The C + D keys for managing the programs, they will then work + / -.		CR3 has memored 10 tuning programs for turbo channel. Buying a new car, your CR3 can update programs (extra service).
	Power Manager is a remote interface to be installed on the dashboard (is not included optional). His task is to allow the pilot to easily control the power output of the engine, handling the tuning, no need to get off the vehicle and open the engine compartment.		CR3 is a Tuningbox 100% wireless. Via the supplied remote control, all software options can be managed remotely from interior of vehicle.
	The USB socket is a key component. HT Box uses USB for software update functions.		Buying a new car, HT Box CR3 can be updated and programmed for most of the common rail vehicles. The upgrade service and any necessary cables and wires are an extra service.
	Each HT Box is equipped with ABS case. ABS has improved properties compared to metal in fact, comparing with old aluminum case does not act as an electrical conductor and dissipates heat much better.		HT Box CR3 is equipped with a remote data communication system named iTs, which allows our technicians to calibrate optimally mapsremotely (the physical presence of the vehicle is not required).
	Each HT Box comes with original connectors, this greatly facilitates installation and no changes are required to the vehicle.		HT Box CR3 is on-line programmable. This makes work easier, avoiding costs for upgrades and avoiding unnecessary waiting.

Technisches Datenblatt

Rolling Dyno Test watch video

Giulietta 2.0 140HP ECU EDC16

Beetle 5C 1.6 TDI 105HP ECU PCR 2.1

A3 2.0 140HP ECU EDC17CP14

Installation example on Porsche Cayenne 3.0 V6 TDI 250cv

Step 1
Remove the engine cover.

Step 2
Locate the sensors described in the manual.

Step 3
Bypass sensors with connectors supplied in the Tuning-Kit.

What is CR3 iTs Power manager? Power Manager is a remote interface to manage the engine power directly from the cab (optional). His task is to allow the pilot to easily control the power output of the engine, to activate and deactivate the Tuning, without having to get off the vehicle by opening the engine compartment. Then allows you to monitor your favorite program from the display, choosing Eco or Hard Tuning; the blue LEDs show the state of activation or deactivation of ChipTuning and red LEDs show status of "Tuning in process" of the two channels separately, Turbo and injection. Power manager, handy Tuning! - After order, let us know by mail if you want to add the Power Manager -

Designed for Speed!	Download datasheet	HT Box CR3 iTs

	Download datasheet

Attention, our brands are protected by law!
As several patrons have copied our trademark, the technical characteristics and quality of original CR3 are unmatched.

Choose the best for your car

choose the original! HT Box CR3 iTs®

	_HT Box CR2 Funk_ 150.00 € ∨	Quantity
		View details

	_HT Box CR2_ 120.00 € ∨	Quantity
		View details

	_Interfaccia CR-3 iTs_ 50.00 € ∨	Quantity
		View details

Mapping

Chip Tuningtools

Tuning Box

Services

Training

Downloads